[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [SA] TransAdelaide/ARTC crossing problems at Blackwood
Maurie Daly <mauried@tpg.com.au> wrote in message
39e19805.32267801@can-news.tpg.com.au">news:39e19805.32267801@can-news.tpg.com.au...
> Unless things have changed dramatically, the pole line carried
> the CTC control + 600 V power , plus telephone comms to
> Wodonga.
Signal Power is IIRC 2.2kV Broadmeadows - Somerton, 440V Somerton
to Wodonga, except for a bit of 230V near Dysart.
There will be the remote control for the SG CTC, there are/were
Telstra pairs Melb - Seymour & Melb - Wodonga to close the loop.
Then there is the Double Line Block circuit, the SG Signal Cct and
the Sepac Phone.
> There was also some sort of permanent phone connection to
> Albury Sth Box.
Thesedays Albury South Box probably does what everyone else does,
picks up the Telstra line and dials 1800 whatever to get to
Adelaide.
> I suspect, but am not sure that it also carrieds the audio and
> control to the Radio Base Stations.
All the Train to Base radio traffic goes via 4 wire? Telstra Ccts.
Only the power might come off the pole line.
--
B.
Email - gunzel412 at dingoblue dot net dot au
ICQ# - 82329734
Phone - long, long, short, long.