Re: [VIC] Somerton 20/5

[Tony Gatt <baulko@tig.com.au>]

david wrote:

> <not a order start>
> Hey, tony when is the Brass Comeng being built ??? We may need it soom for
> 1/87th transfers. :)
>

i have the brass, and the specs.. just need to purchase the time now (I'm sure you
understand...)

>
> Regards,
> David Head
>
> Tony Gatt wrote:
>
> > James Brook wrote:
> >
> > > Hi all,
> > >
> > > I went to Somerton on Saturday to photograph the spark transfer. When I
> > > got there at 1144 GNR's (T)377 was shunting a 6 car comeng set out of
> > > the Clyde factory. Another set was sitting in the siding and 377 pushed
> > > this into the factory at 1159. Shortly after this X37 (FV livery) passed
> > > Somerton at 1205 with an up mini quarry train. The up comeng transfer
> > > then departed at 1227.
> > >
> >
> > Good to see that nothing changes as far as shunting goes. This was the exact
> > manouvre used in 1990 when the Comeng sets were sent to Martin and King to
> > have Driver communication doors in them.
> >
> > What are they going there for this time?
> >
> > Is the Martin & King siding still secured by single lever and padlock?
> >
> > Is it still Martin & King?
> >
> > >
> > > Here are several image captures from my video:
> > >
> > > 377 shunting a comeng set out of the factory:
> > > http://www.ozemail.com.au/~ajmbrook/temp/377_1.jpg
> > >
> > > 377 departing with the up transfer:
> > > http://www.ozemail.com.au/~ajmbrook/temp/377_2.jpg
> > >
> > > X37 with the up mini quarry train:
> > > http://www.ozemail.com.au/~ajmbrook/temp/x37_mini_quarry.jpg
> > >
> > > Note: These images are copyright and are not to be used for anything
> > > other than personal non-profit use without my permission.
> > >
> > > --
> > > - James Brook -
> > >
> > > ----------------------------------------------------------------
> > > e-mail:
> > > mailto:ajmbrook@ozemail.com.au
> > > Victorian Railfan Web Site:
> > > http://www.railpage.org.au/vr/
> > > ----------------------------------------------------------------
> >
> > --
> > Thanks,
> >
> > Tony Gatt.
> >
> > ________________________________________________________
> >
> >   How do I set my Laser printer to "Stun"?
> > ________________________________________________________
> >
> > Personal Website: http://homepages.tig.com.au/~baulko/
> > Railway Website:   http://www.railpage.org.au/railpix/
> > ________________________________________________________

--
Thanks,

Tony Gatt.

________________________________________________________

  How do I set my Laser printer to "Stun"?
________________________________________________________

Personal Website: http://homepages.tig.com.au/~baulko/
Railway Website:   http://www.railpage.org.au/railpix/
________________________________________________________