[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Berrima
- To: Ausloco@listbot.com
- Subject: Re: Berrima
- From: "kak 015" <kak015@hotmail.com>
- Date: Wed, 26 Jan 2000 14:17:55 EST
- Delivered-To: mailing list Ausloco@listbot.com
- Mailing-List: ListBot mailing list contact Ausloco-help@listbot.com
- Reply-To: "Aus loco discussion mailing list" <Ausloco@listbot.com>
Aus loco discussion mailing list
>From: "emd567" <emd567@mitmania.net.au>
>Reply-To: "Aus loco discussion mailing list" <Ausloco@listbot.com>
>To: "Aus loco discussion mailing list" <Ausloco@listbot.com>
>Subject: Re: Berrima
>Date: Wed, 26 Jan 2000 13:18:41 +1100
>
>Aus loco discussion mailing list
>
>The Berrima works shunter never leaves the site except for a short trek
>down
>to the junction every now and then to lift or drop off some cement hoppers.
>It doesn't venture out much any more as the train engine off 1251 runs
>wagons to and from the works as required.
>I think it is a GE 70 toner which has been reengined at some stage with
>bigger Cummins engines.
>There isn't a shunter out at the quarry at Marulan, and AFAIK there hasn't
>ever been one.
>
I photographed it at Berrima junction on 12th jan 1999. It had the number D2
on a metal plate on the cab side. It was painted yellow with black safety
stripe on the pilots. Hope this is of some help.
Regards
Ivar
> > ----------
> > From: emd567 <emd567@mitmania.net.au>
> > To: Aus loco discussion mailing list <Ausloco@listbot.com>
> > Subject: Inghams Feed Mill Berrima
> > Date: Tuesday, 25 January 2000 19:51
> >
> > Aus loco discussion mailing list
> >
> > Went past there today and there is still a lot of work to be done.
> > The main storage bin which I thought was finished before Xmas is having
>the
> > sides extended more, so is now about 30' high and about 40' square and
>the
> > stand is about 20' high that the bin sits on.
> > There are numerous other sheds and small silos around that have sprung
>up
> > in the last couple of months.
> > I think it will be quite some time before it is ready for train
>movements,
> > maybe about six months.
> > Talking to the guys from Mossy box and they reckon the longer it takes
>the
> > better as Berrima Jnct. gets quite busy at times with up to six trains
>or
> > engines shunting.The locos on limestone and clinker work are fuelling by
> > road truck at the same time at the Junction and with only 4 roads plus
>the
> > arrival rd it gets very busy.
> > On the south Danny
> >
> >
> >
> > ______________________________________________________________________
> > To unsubscribe, write to Ausloco-unsubscribe@listbot.com
> > Start Your Own FREE Email List at http://www.listbot.com
> >
> >
> > ______________________________________________________________________
> > To unsubscribe, write to Ausloco-unsubscribe@listbot.com
> > ______________________________________________________________________
> > Get a Free PC with a 3-year subscription to The Microsoft Network
> > (after rebates). The new PC features a 400MHz Celeron, 32MB, 4GB, 40x
> > CD, 3D Graphics and a 56K modem. Come to
> > http://www.listbot.com/links/myfavoritepc2 for details. Act now
> > since this is a limited time offer!
> >
>
>
>______________________________________________________________________
>To unsubscribe, write to Ausloco-unsubscribe@listbot.com
>Start Your Own FREE Email List at http://www.listbot.com/links/joinlb
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
______________________________________________________________________
To unsubscribe, write to Ausloco-unsubscribe@listbot.com
Start Your Own FREE Email List at http://www.listbot.com/links/joinlb